1. Be sure to select wire diameter coarse sieve, sieve installment is relatively cumbersome.
2. When cutting, screen width and grid can be consistent, Length must be longer than rack out of 50 ~ 70 mm.
3. When installing, be sure to mesh up tight, because it is the important factors that tensioner impacts screening efficiency.
4. If the proportion of material is big or sieve size is big, it should increase suitable mesh network in the screen below, the aim is to play a supporting role, reducing the pressure on the screening material network, extending its life.
5. After net rock puts into straining box. Remember long mesh does not srick into related outlet. Avoid mixing phenomenon in this.
6. When installing the platen, be sure to pay attention to its flatness, and lined with foam sealing tape scalability strong uniform locking, because it is both crucial to prevent the occurrence of mixed-level, but also an important factor in the life of the screen is the impact.
7. Installation is complete, you should use a little material on the screening machine fabrics and conduct screening tests, even if the material is fed forward, and the grading is accurate, no mixing phenomenon, then you can put to use; Conversely, if there deviation or poly heap and other uneven, adjust the smoothness and uniformity of the surface mesh sieve machine; If there is mixed-level phenomenon, you should check whether the screen sealing and compaction.
